Libraries.Interface.Controls.ScrollableMenuPanel

Returns true if rendering the focus event.

Parameters

• Libraries.Interface.Events.BehaviorEvent

This action returns a default behavior for this paricular control. Some controls do nothing by default, like a TextBox that responds to different kinds of input. Others, however, have default behaviors, like a Button or a MenuItem. If there is no default behavior, this action returns undefined.

Parameters

• Libraries.Interface.Controls.MenuItem

Parameters

• integer index
• Libraries.Interface.Controls.MenuItem

This action adds a different Item2D into this one, storing the added Item2D at a specific index in the internal array.

Parameters

• integer index
• Libraries.Interface.Item2D

This action adds a different Item2D into this one. This makes a few things happen. 1. The added item will get this item as its parent. 2. The added item's x and y coordinates will become relative to this Item. 3. Most actions on this Item will also affect the added Item.

Parameters

• Libraries.Interface.Item2D

This action adds a new Behavior to this Item.

Parameters

• Libraries.Interface.Behaviors.Behavior

This action removes an Item2D at a specifed index from the internal array.

Parameters

• Libraries.Interface.Events.ControlActivationListener

This action adds a FocusListener to the Item. When the Item receives a FocusEvent due to either gaining or losing the focus, the listener will be notified.

Parameters

• Libraries.Interface.Events.FocusListener

This action adds a GestureListener to the Item. If the Item ever receives a GestureEvent, the listener will be notified.

Parameters

• Libraries.Interface.Events.GestureListener

Returns true if rendering the mouse down event.

Parameters

• Libraries.Interface.Layouts.LayoutProperties

This action adds a MouseListener to the Item. If the Item ever receives a MouseEvent due to a mouse click, the mouse listener will be notified.

Parameters

• Libraries.Interface.Events.MouseListener

This action adds a MouseMovementListener to the Item. If the Item ever receives a MouseEvent due to mouse movement, the listener will be notified.

Parameters

• Libraries.Interface.Events.MouseMovementListener

This action adds a MouseWheelListener to the Item. If the Item ever receives a MouseEvent due to the mouse wheel being scrolled, the listener will be notified.

Parameters

• Libraries.Interface.Events.MouseWheelListener

This action adds the given SelectionListeners to the Control.

Parameters

• Libraries.Interface.Events.SelectionListener: the selectionListener to add to the control.

This action adds a TextureLoadListener to the texture. If the texture finishes asynchronously loading an image, the listener will be alerted.

Parameters

• Libraries.Interface.Events.TextureLoadListener: A TextureLoadListener to be alerted when this texture finishes asynchronous loading.

This action adds a TouchListener to the Item. If the Item ever receives a TouchEvent, the listener will be notified.

Parameters

• Libraries.Interface.Events.TouchListener

This action is used to advance the item forward in time in physics space to synchronize it for time of impact solving. This action is used internally and users should not need to use this action. Attribute Parameter time The amount of seconds to advance the item forward in time

Parameters

• number time

This action applies an angular impulse to this item. The units are in kilogram units squared per second. This modifies the angular velocity of this item. Physics must be enabled on this item before using this action.

Parameters

• number impulse: The angular impulse in kilogram units squared per second

This action applies a force to this item at the passed point. The force is in kilogram units per second per second. The point is the screen coordinates where the point will be applied. If the point is not on the center of the item, then a torque will be introduced causing the item to rotate. Physics must be enabled on this item before using this action.

Parameters

• Libraries.Compute.Vector2: The force to apply to the item in kilogram units per second per second
• Libraries.Compute.Vector2: The point at which to apply the force

This action applies a force to this item at the center of the item. The force is in kilogram units per second per second. No torque is introduced to the item when using this action. Physics must be enabled on this item before using this action.

Parameters

• Libraries.Compute.Vector2: The force to apply to the item in kilogram units per second per second

This action applies a linear impulse to this item at the passed point. The impulse is in kilogram units per second. This immeadietly modifies the linear velocity of this item. The point is the screen coordinates where the impulse will be applied. If the point is not the center of the item, then the angular velocity of this item will also be modified. Physics must be enabled on this item before using this action.

Parameters

• Libraries.Compute.Vector2: The impulse to apply in kilogram units per second
• Libraries.Compute.Vector2: The point at which to apply the impulse

This action applies a torque to this item. The units are kilogram units squared per second per second. Physics must be enabled on this item before using this action.

Parameters

• number torque: The torque to apply to this item in kilogram units squared per second per second

This action returns whether or not this Item is allowing its children to receive mouse events if the Item is custom drawing. If the Item isn't using custom drawing, this value is irrelevant -- children objects always receive mouse events before the parent if the parent isn't performing custom drawing.

Return

boolean:

This action is used to indicate that two items have just begun colliding. When two Items collide, the BeginCollision action should be called on both of them, with the other item passed as a parameter to the action. Note that this action does nothing by default, but classes that inherit from Item may override it.

Parameters

• Libraries.Interface.Item: The other Item involved in the collision.

This action is used when a control is moused over by the mouse.

This action gets the position of the center of this item in global (world) coordinates.

Parameters

• boolean flag

This action stops all behaviors this Item is following without finishing them.

This action is used when a control is clicked by the mouse.

This action sets the mass, mass moment of inertia, and how the 2D item should move (via linear velocity) to be at the desired location.

Return

boolean:

This action compares two object hash codes and returns an integer. The result is larger if this hash code is larger than the object passed as a parameter, smaller, or equal. In this case, -1 means smaller, 0 means equal, and 1 means larger. This action was changed in Quorum 7 to return an integer, instead of a CompareResult object, because the previous implementation was causing efficiency issues.

Parameters

• Libraries.Language.Object: The object to compare to.

Return

integer: The Compare result, Smaller, Equal, or Larger.

This action computes the distance of the passed point from the collision shape attached to this item. This action is used internally and users should not need to use this action.

Parameters

• Libraries.Compute.Vector2: The vector representing the point to compute the distance from
• integer childIndex: The index of the collision shape attached to this item we want the bounding box of
• Libraries.Compute.Vector2: The direction of the point from the shape

Return

number: The distance of the point from the collision shape of this item

This action tests if a point in global x,y coordinates is contained inside this Item2D. The global coordinates are considered to be the x and y coordinates of this Item plus its offsetX and offsetY values.

Parameters

• number containsX
• number containsY

Return

boolean: Whether or not the point is contained in this Item.

This action obtains the Input Table from this control, copies it, assigns it a group name, sets the control to use the new input table, and then adds it to the global input table hash table.

Parameters

• text name: the name of the group for the new input table.

Return

Libraries.Game.InputTable: the input table copy

This action copies the information from a given TextureRegion at the given coordinates to the given width and height onto this TextureRegion.

Parameters

• Libraries.Game.Graphics.TextureRegion
• integer x
• integer y
• integer width
• integer height

This action copies the information from the given TextureRegion into this TextureRegion.

Parameters

• Libraries.Game.Graphics.TextureRegion

This action creates the nodes for this item for the broadphase collision. This action is needed in order to add the item to the collision detection system. This action is used internally and users should not need to use this action.

Parameters

• Libraries.Game.Collision.BroadphaseCollision2D: The broadphase to add this item to
• Libraries.Game.Collision.PhysicsPosition2D: The current position of the item in physics space

This action destroys the nodes for this item for the broadphase collision, essentially removing it from the collision detection system. This action is used internally and users should not need to use this action.

Parameters

• Libraries.Game.Collision.BroadphaseCollision2D: The broadphase to remove this item's nodes from

The Dispose action will dispose the currently loaded texture. This frees up computer resources, but the texture will no longer be usable. Note that multiple Drawables can use the same texture, and disposing of it will get rid of the texture information not just for this Drawable, but any Drawable that is using the texture. Dispose should be used when a texture will not be used again. Here are some guide lines for when you should or should not dispose a Drawable: 1. If the Drawable was loaded using Load(text) or Load(File), then the Drawable created new texture data when it was loaded. This can be safely disposed, unless you copied the Drawable, e.g. with Load(Drawable). 2. If the Drawable was loaded as a shape, e.g. with the LoadRectangle action, the Drawable created new texture data when it loaded. It can be safely disposed, unless you copied the Drawable, e.g. with Load(Drawable). 3. If the Drawable was loaded using a Texture or a TextureRegion, such as with the Load(Texture) action, then it is NOT safe to dispose this if there are any other Drawables that are still in use which were also loaded with the same Texture. If there are no other Drawables that were loaded with the Texture, it is safe to dispose. If a texture was used to load multiple Drawables, it is good practice to use the Dispose action directly from the Texture once all of the Drawables are no longer in use. 4. If the Drawable was loaded with an ImageSheet, you should NEVER dispose the Drawable's texture. All Drawables loaded from an ImageSheet use the same Texture data, so disposing of any Drawable from an ImageSheet will delete the ImageSheet's texture data. If you ever wish to dispose an ImageSheet's texture data, it is good practice to use the ImageSheet's Dispose action.

This action is used to call Dispose on this Item and on the entire children hierarchy of this Item.

This action is used to call Dispose on the entire children hierarchy of this Item. This will not call Dispose on this Item.

Parameters

• number x
• number y

Parameters

• Libraries.Game.Graphics.Painter2D

This action will remove all items from this item's children hierarchy. Note that this will not empty the hierarchies of the contained Items.

This action will call Empty on the entire children hierarchy of this item, and then empty this item as well.

This action is used to call Empty on all children contained in this item's children hierarchy. This will not empty the children of this item.

This action empties or removes all SelectionListeners which have been added to the Control of the given SelectionEvent.

This action removes all TextureLoadListeners that have been added to the texture.

This action enables physics for this item. Passing true turns on physics for this item while passing false turns off physics for this item.

Parameters

• boolean flag: Whether or not to enable physics for this item

This action is used when a control is moused over and it ends.

This action determines if two objects are equal based on their hash code values.

Parameters

• Libraries.Language.Object: The to be compared.

Return

boolean: True if the hash codes are equal and false if they are not equal.

This action gets the linear velocity of this item in units per second. Physics must be enabled on this item before using this action.

Parameters

• boolean flag

This action is used to indicate that two items that were previously colliding no longer are. The FinishCollision action should be called on both Items involved, with the other item passed as a parameter to the action. Note that this action does nothing by default, but classes that inherit from Item may override it.

Parameters

• Libraries.Interface.Item: The other Item involved in the collision.

This action flips the Drawable along the x-axis, or in other words, flips it horizontally in 2D space.

This action flips the Drawable along the y-axis, or in other words, flips it vertically in 2D space.

This action sets focus on this Item. If the Item is not focusable, it will instead look through the parent hierarchy and set focus on the first focusable ancestor. If no focusable Item can be found, this action will have no effect.

This action is fired if the item received the focus.

Parameters

• Libraries.Interface.Events.FocusEvent

This action is used when a control gains the selection.

Parameters

• integer index

Return

Libraries.Interface.Controls.MenuItem

This action gets the accent color from the control.

Return

Libraries.Game.Graphics.ColorGroup: the accent control.

This action returns the current accessiblity code for this Item

Return

integer:

This action returns the custom accessibility role description for this item, if any.

Return

text:

This action returns the name of the accessiblity code for this Item as Text

Return

text:

This action returns the parent of this Item2D. An Item2D gets a parent when it is added to another Item using the Add action.

Return

Libraries.Interface.Item:

This action returns a default behavior for this paricular control. Some controls do nothing by default, like a TextBox that responds to different kinds of input. Others, however, have default behaviors, like a Button or a MenuItem. If there is no default behavior, this action returns undefined.

Return

Libraries.Interface.Behaviors.Behavior:

This action gets the inverse inertia of this item (i.e., one divided by the inertia of this item). Physics must be enabled on this item before using this action.

Return

number: The inverse inertia of this item

This action gets this item's angular velocity in radians per second. Physics must be enabled in this item before using this action.

Return

number: The angular velocity of this item in radians per second

Return

number

This action gets the color of the Control background color.

Return

Libraries.Game.Graphics.ColorGroup: the background the color.

This action gets the border color of the control.

Return

Libraries.Game.Graphics.ColorGroup: the controls border color.

This action gets the border style either, LayoutProperties.TOP, LayoutProperties.BOTTOM, LayoutProperties.LEFT, LayoutProperties.RIGHT, and LayoutProperties.ALL.

Return

integer:

This action gets the border thickness on the control.

Return

number: the border thickness.

This action returns the bottom left pixel rounding value.

Return

number: the bottom left pixel rounding value.

This action returns the bottom left rounding value.

Return

number: the bottom left rounding value.

This action gets the bottom margin size. The bottom margin is the space outside of the bottom border.

Return

number: the number amount of bottom margin.

This action gets the bottom padding size. The bottom padding is the space inside of the bottom border.

Return

number: the number amount of bottom padding.

This action returns the bottom right pixel rounding value.

Return

number: the bottom right pixel rounding value.

This action returns the bottom right rounding value.

Return

number: the bottom right rounding value.

This action returns where the TextureRegion begins the bottom edge of its region on the stored texture, where 0 is the far bottom of the texture and 1 is the far top side of the texture.

Return

number:

This action is used to get the bounding box of the item. A bounding box is an axis-alligned rectangle containing the shape used for broadphase collision. This action is used internally and users should not need to use this action.

Parameters

• integer childIndex: The index of the collision shape attached to this item we want the bounding box of

Return

Libraries.Game.Collision.BoundingBox2D: The bounding box of the collision shape attached to this item

This action returns a rectangle that fully encloses the four corners of the Item as it is represented by its internal vertices array. Note that the rectangle produced by this action will be larger than the actual box formed by this Item's vertices if the Item is rotated.

Return

Libraries.Game.Shapes.Rectangle:

This action returns the x coordinate of the center of this Item2D.

Return

number:

This action returns the y coordinate of the center of this Item2D.

Return

number:

This action gets the children of this item in an array.

Return

Libraries.Containers.Array: The children of this item in an array

This action gets the clipping coordinates of this Item2D. The coordinates are returned via the two provided Vector2 parameters, the first vector storing the x values of the left and right sides of the clipping coordinates and the second vector storing the y values of the bottom and top sides. The returned boolean value indicates if this Item uses these clipping coordinates (i.e. if this Item or one of its parent Items has clipping enabled). If the clipping is valid, the action returns true. Otherwise, it returns false.

Parameters

• Libraries.Compute.Vector2
• Libraries.Compute.Vector2

Return

boolean:

This action gets the total force on this item. The units are kilogram units per second per second. Physics must be enabled on this item before using this action.

Return

boolean: The total force in kilogram units per second per second

This action gets this item's angular velocity in radians per second. Physics must be enabled in this item before using this action.

Return

integer: The angular velocity of this item in radians per second

This is an action used internally to retrieve the head of the linked list of collisions with this item. This action is used internally and users should not need to use this action.

Return

Libraries.Game.Collision.CollisionEdge2D: The head of the doubly linked list of collisions

This action returns the color filter stored in the Drawable. To see if it's currently in use, use the UsingCustomColor action. If the Drawable is using a different type of filter (such as a Gradient) this will return undefined. To get whatever filter the Drawable is using regardless of type, use the GetColorGroup action.

Return

Libraries.Game.Graphics.Color:

This action returns the color filter stored in the Drawable. The returned value is a ColorGroup object, which describes how the color is mapped to the four corners of the Drawable. If no filter is in use, this action will return undefined.

Return

Libraries.Game.Graphics.ColorGroup:

This action gets the color of a given property in the Control.

Parameters

• text property

Return

Libraries.Game.Graphics.ColorGroup:

This action returns how many rows this Control should be divided into when using a GridLayout. This will have no effect if this Control is not a container or if it is using a different layout.

Return

integer:

This action returns how many columns this Control should be divided into when using a GridLayout. This will have no effect if this Control is not a container or if it is using a different layout.

Return

integer:

This action returns the LayoutProperties that were last used to define the Control, and thus describe its current state. Note that if the Control hasn't been laid out yet, this will return undefined.

Return

Libraries.Interface.Layouts.LayoutProperties: The last LayoutProperties used to layout this Control, or undefined if it hasn't been laid out yet.

This action obtains the default font for this control. This allows individual controls to customize their default font properties on a per control basis. By default, the system asks for the default system font name on a per control basis, then loads that font and returns it. Font loading is shared, so loading many fonts of the same type and size is not particularly expensive and can be done without much concern for memory requirements.

Return

Libraries.Game.Graphics.Font:

This action defines what the default font is for this control. This allows individual controls to customize their default font properties on a per control basis.

Return

text:

This action defines what the default font size for this control. This allows individual controls to customize their default font properties on a per control basis.

Return

integer:

This action returns the default LayoutProperties used for this Control.

Return

Libraries.Interface.Layouts.LayoutProperties: The default LayoutProperties of this Control.

This action sets the interface scale for the control.

Return

text: the scale, a number between 0 and 1 that scales the control.

This action defines what the default font is for this control. This allows individual controls to customize their default font properties on a per control basis.

Return

text:

This action applies a linear impulse to this item at the passed point. The impulse is in kilogram units per second. This immeadietly modifies the linear velocity of this item. The point is the screen coordinates where the impulse will be applied. If the point is not the center of the item, then the angular velocity of this item will also be modified. Physics must be enabled on this item before using this action.

Return

number:

This action returns the current internal description of the Item.

Return

text:

This action will create a new Texture with a solid rectangle of the given color with the given width and height. This texture is then loaded into the Drawable.

Return

Libraries.Game.Graphics.DrawableShape:

This action returns an integer code representing the type of graphics that's been loaded into this Drawable. The type values can be found in the SceneProperties class. The default value is NONE.

Return

integer: An integer code from the SceneProperties class that describes the type of image this Drawable uses.

This action gets the focus border color.

Return

Libraries.Game.Graphics.ColorGroup: the focus border color.

This action sets the focus color.

Return

Libraries.Game.Graphics.ColorGroup: the focus color.

This action gets focus font color.

Return

Libraries.Game.Graphics.ColorGroup: the focus font color.

This action returns an Iterator containing all of the FocusListeners that have been added to this Item using the AddFocusListener action.

Return

Libraries.Containers.Iterator: An iterator containing all of the registered FocusListeners.

This action returns the Font being used by this Control. How this Font is used varies between Controls, and in some cases the Control will ignore it entirely (for example, ScrollPanes), but typically this sets the font that's used for the default label on many Controls, such as Buttons. If the Font is undefined, many Controls will omit their default label.

Return

Libraries.Game.Graphics.Font: The Font being used for this Control.

This action gets the current the font color of the font contained in the Control.

Return

Libraries.Game.Graphics.ColorGroup:

This action gets the font outline color value.

Return

Libraries.Game.Graphics.ColorGroup: the font outline color value.

This action returns the font outline thickness value.

Return

number: the font outline thickness value.

This action returns the base Font size to be used by this Control, if the Control uses a Font.

Return

integer:

This action gets the total force on this item. The units are kilogram units per second per second. Physics must be enabled on this item before using this action.

Return

Libraries.Compute.Vector2: The total force in kilogram units per second per second

This action gets the color of the Control foreground color.

Return

Libraries.Game.Graphics.ColorGroup: the foreground color.

This action gets the color of the Control foreground selection color.

Return

Libraries.Game.Graphics.ColorGroup: the foreground selection color.

This action applies a force to this item at the center of the item. The force is in kilogram units per second per second. No torque is introduced to the item when using this action. Physics must be enabled on this item before using this action.

Return

number:

Return

Libraries.Interface.Controls.MenuItem

This action returns an Iterator containing all of the GestureListeners that have been added to this Item using the AddGestureListener action.

Return

Libraries.Containers.Iterator: An iterator containing all of the registered GestureListeners.

This action returns the Item's global x coordinate. This is the actual world coordinate that the item exists at after it has been offset by its parent's position. If this Item doesn't have a parent, and the offset hasn't been set manually, this is the same as GetX().

Return

number:

This action returns the Item's global y coordinate. This is the actual world coordinate that the item exists at after it has been offset by its parent's position. If this Item doesn't have a parent, and the offset hasn't been set manually, this is the same as GetY().

Return

number:

This action returns the Item's global z value. For an Item2D, this simply returns the Item2D's current z value.

Return

number:

This action gets the glow color from the control.

Return

Libraries.Game.Graphics.ColorGroup: the glow color.

This action returns the gradient stored in the Drawable. To see if it's currently in use, use the UsingCustomGradient action. If the Drawable is using a different type of filter (such as a Color) this will return undefined. To get whatever filter the Drawable is using regardless of type, use the GetColorGroup action.

Return

Libraries.Game.Graphics.Gradient:

The GetGridHeight action returns how many cells in a column this Control occupies. By default, this value is 1. This value is only used for GridLayouts, and is ignored by other layouts.

Return

integer:

The GetGridWidth action returns how many cells in a row this Control occupies. By default, this value is 1. This value is only used for GridLayouts, and is ignored by other layouts.

Return

integer:

This action returns this Control's cell x-coordinate within a GridLayout. This indicates which column this Control is located within. If the Control's parent container isn't using a GridLayout, this value is ignored.

Return

integer:

This action returns this Control's cell y-coordinate within a GridLayout. This indicates which row this Control is located within. If the Control's parent container isn't using a GridLayout, this value is ignored.

Return

integer:

This action gets the hash code for an object.

Return

integer: The integer hash code of the object.

This action will return the currently set height of the Item2D.

Return

number:

The GetHorizontalLayoutMode is used to determine how the width of a Control is calculated. It should be one of the following constants: STANDARD, which will calculate the width as a set number of pixels plus a percentage of the container's width. FILL, which will make the width fill the remaining width of the container. FIT_CONTENTS, which will calculate the width to fit the children contents.

Return

integer: the integer that maps to the layout mode constant, one of STANDARD, FILL, or FILL_CONTENTS.

This action gets the Icon (typically an image or texture) used by this Control. Different Controls use this Icon differently, depending on their purpose.

Return

Libraries.Game.Graphics.TextureRegion:

This action gets the Icon color from the control.

Return

Libraries.Game.Graphics.ColorGroup: the icon color.

Return

number

This action is used internally by the rendering system to determine how many indices a Drawable uses in a Mesh. Most users will never need to call this action directly.

Return

integer:

This action gets the rotational inertia of this item. The inertia is in kilogram units squared.

Return

number: The inertia of this item in kilogram units squared

This action returns the input group for this Item. When used with the Game libraries, this tag describes what InputTable (if any) can interact with this Item due to input.

Return

text: The input group tag being used by this Item.

Return

Libraries.Game.InputTable:

This action sets the base Font size to be used by this Control, if the Control uses a Font.

Return

text:

This action sets the interface scale for the control.

Return

number: the scale, a number between 0 and 1 that scales the control.

This action gets the inverse inertia of this item (i.e., one divided by the inertia of this item). Physics must be enabled on this item before using this action.

Return

number: The inverse inertia of this item

This action gets the inverse mass of the item (i.e., one divided by the mass of this item). Physics must be enabled on this item before using this action.

Return

number: The inverse mass of this item

This action returns an Item2D that was previously added to this Item2D by finding it at the given index in the internal array of children Items.

Parameters

• integer index

Return

Libraries.Interface.Item2D:

This action searches through all Items stored in this Item2D and finds the deepest Item which contains the given point in global coordinates.

Parameters

• number x
• number y

Return

Libraries.Interface.Item2D: The deepest item in the children hierarchy at the given point.

This action returns the number of items contained in this Item2D.

Return

integer:

This action returns an iterator containing all the items contained in this Item2D.

Return

Libraries.Containers.Iterator:

Return

number

Return

Libraries.Containers.Iterator

This is an action used internally to retrieve the head of the liked list of joints connected to this item. This action is used internally and users should not need to use this action.

Return

Libraries.Game.Physics.Joints.JointEdge2D: The head of the linked list of connected joints

Return

number

This action returns the text used for this Control's label, if it has one.

Return

text: The text of this Control's label.

This action returns the current Layer2Dthat this Item2D is a part of in the Game libraries.

Return

Libraries.Game.Layer2D:

Returns true if rendering the selection event.

Return

Libraries.Interface.Layouts.Layout:

This action returns the best suited LayoutProperties stored by the Control for use with the given container width and height. The Control will attempt to find the most restricted LayoutProperties that is still valid, prioritizing width over height in case of equal values.

Parameters

• number containerWidth: The width of the container the LayoutProperties must be legal for.
• number containerHeight: The height of the container the LayoutProperties must be legal for.

Return

Libraries.Interface.Layouts.LayoutProperties: The LayoutProperties contained in the Control that is best suited to the requested container dimensions.

This action is fired if the item lost the focus.

Return

Libraries.Containers.Iterator:

This action returns how many rows this element should occupy, if the layout supports it. This effectively makes the control taller. This is most commonly used in conjunction with FormRowLayout (or StackedRowPage which uses that layout).

Return

number:

This action gets the left margin size. The left margin is the space outside of the left border.

Return

number: the number amount of left margin.

This action gets the left padding size. The left padding is the space inside of the left border.

Return

number: the number amount of left padding.

This action returns where the TextureRegion begins the left edge of its region on the stored texture, where 0 is the far left of the texture and 1 is the far right side of the texture.

Return

number:

Given the local coordinates of a vector, this action computes the screen coordinates of the corresponding vector.

Return

number: The coordinates of the corresponding global vector Attribute Example use Libraries.Interface.Item2D use Libraries.Compute.Vector2 Item2D item Vector2 localVector item:SetWidth(100) item:SetHeight(100) item:SetPosition(400, 250) localVector:Set(0, 0) // Get the coordinates of the center of the item Vector2 worldVector = item:GetWorldVector(localVector)

This action gets the linear velocity of this item in units per second. Physics must be enabled on this item before using this action.

Return

Libraries.Compute.Vector2: The vector representing the linear velocity of this item in units per second

Given a global point (i.e., the screen coordinates of the point), this action computes the corresponding point relative to the center of this item.

Parameters

• Libraries.Compute.Vector2

Return

Libraries.Compute.Vector2: The coordinates of the point relative to the center of this item

Given the screen coordinates of a vector, this action computes the local coordinates of the vector (i.e., the coordinates of the vector relative to the center of this item)

Parameters

• Libraries.Compute.Vector2

Return

Libraries.Compute.Vector2: The local coordinates of the corresponding vector

This action gets the position of the center of this item in local coordinates (i.e., with respect to itself).

Return

Libraries.Compute.Vector2: The vector representing the center of this item in local coordinates

Given a global point (i.e., the screen coordinates of the point), this action computes the corresponding point relative to the center of this item.

Parameters

• Libraries.Compute.Vector2: The screen coordinates of the point to compute

Return

Libraries.Compute.Vector2: The coordinates of the point relative to the center of this item

Given the screen coordinates of a vector, this action computes the local coordinates of the vector (i.e., the coordinates of the vector relative to the center of this item)

Parameters

• Libraries.Compute.Vector2: The screen coordinates of the vector

Return

Libraries.Compute.Vector2: The local coordinates of the corresponding vector

This action is used to advance the item forward in time in physics space to synchronize it for time of impact solving. This action is used internally and users should not need to use this action. Attribute Parameter time The amount of seconds to advance the item forward in time

Parameters

• Libraries.Game.Physics.Mass2D

This action returns the mass of the item in kilograms. Physics must be enabled on this item before using this action. If the item is non-responsive or unmovable, the mass is zero.

Return

number: The mass in kilograms

This action will create a new Texture with a solid black circle with the given radius. This texture is then loaded into the Drawable.

Return

Libraries.Game.Graphics.Mesh:

This action is used internally by the rendering system to determine what index a Drawable starts at in a Mesh. Most users will never need to call this action directly.

Return

integer:

This action gets the mouse down font color.

Return

Libraries.Game.Graphics.ColorGroup: the mouse over font color value.

This action gets the mouse down font color.

Return

Libraries.Game.Graphics.ColorGroup: the mouse down font color.

This action gets the mouse down glow color.

Return

Libraries.Game.Graphics.ColorGroup: the mouse down glow color.

This action returns an Iterator containing all of the MouseListeners that have been added to this Item using the AddMouseListener action.

Return

Libraries.Containers.Iterator: An iterator containing all of the registered MouseListeners.

This action returns an Iterator containing all of the MouseMovementListeners that have been added to this Item using the AddMouseMovementListener action.

Return

Libraries.Containers.Iterator: An iterator containing all of the registered MouseMovementListeners.

This action gets the mouse over color.

Return

Libraries.Game.Graphics.ColorGroup: the mouse over color.

This action gets the mouse over font color.

Return

Libraries.Game.Graphics.ColorGroup: the mouse over font color value.

This action gets the mouse over glow color.

Return

Libraries.Game.Graphics.ColorGroup: the mouse over glow color.

This action returns an Iterator containing all of the MouseWheelListeners that have been added to this Item using the AddMouseWheelListener action.

Return

Libraries.Containers.Iterator: An iterator containing all of the registered MouseWheelListeners.

This action returns the current internal name of the Item.

Return

text:

This action returns the next focus item. When this Item has the focus and the user requests the focus to advance (e.g. by pressing the tab key), the returned value is the next item to receive that focus, if it is defined. If it isn't defined, the focus can not advance from this Item.

Return

Libraries.Interface.Item: The next Item to receive focus after this one.

This action gets the number of broadphase nodes this item has. This action is used internally and users should not need to use this action.

Return

integer: The number of broadphase nodes attached to this item

This action returns all of the broadphase nodes attached to this item in an array. This action is used internally and users should not need to use this action.

Return

Libraries.Containers.Array: The broadphase nodes attached to this item in an array

This action gets a generic property with a specified name from the control.

Parameters

• text property: the property name.

Return

number: the number value of the property.

This action returns the X offset of the Item. The offset tells the Item where to relate its X position to. In other words, the X offset is where an X coordinate of 0 is for this Item. This is automatically set when using an action to add an Item to another Item.

Return

number:

This action returns the Y offset of the item. The offset tells the Item where to relate its Y position to. In other words, the Y offset is where a Y coordinate of 0 is for this item. This is automatically set when using an action to add an Item to another Item.

Return

number:

This action returns the Z offset of the item. The offset tells the Item where to relate its Z position to. In other words, the Z offset is where a Z coordinate of 0 is for this item. This is automatically set when using an action to add an Item to another Item.

Return

number:

This action will return the current X origin of this Item2D. By default, the origin is at the coordinates 0, 0.

Return

number:

This action will return the current Y origin of this Item2D. By default, the origin is at the coordinates 0, 0.

Return

number:

This action returns the parent of this Item2D. An Item2D gets a parent when it is added to another Item using the Add action.

Return

Libraries.Interface.Item2D:

This action returns the height of the Control relative to the size of its container, if the container's Layout supports it.

Return

number: The target height as a percentage (as a value between 0.0 and 1.0) of the container's height.

This action returns the x-coordinate of the "origin" of the Control, as a percentage of its width. The origin is the point that the Control is positioned by. For example, by default, the origin is at 0% x and 0% y, or the bottom-left corner of the Control. Changing the percentage origin x and y to 0.5 (50%) would mean the Control should be positioned using its center instead. The origin point is used by layouts that allow for specific positioning, such as ManualLayout or GridLayout. It is ignored by layouts that have special positioning rules, such as FlowLayout.

Return

number:

This action returns the y-coordinate of the "origin" of the Control, as a percentage of its width. The origin is the point that the Control is positioned by. For example, by default, the origin is at 0% x and 0% y, or the bottom-left corner of the Control. Changing the percentage origin x and y to 0.5 (50%) would mean the Control should be positioned using its center instead. The origin point is used by layouts that allow for specific positioning, such as ManualLayout or GridLayout. It is ignored by layouts that have special positioning rules, such as FlowLayout.

Return

number:

This action returns the width of the Control relative to the size of its container, if the container's Layout supports it.

Return

number: The target width as a percentage (as a value between 0.0 and 1.0) of the container's width.

This action returns the x position of the Control relative to the size of its container, if the container's Layout supports it.

Return

number: The target x position as a percentage (as a value between 0.0 and 1.0) of the container's width.

This action returns the y position of the Control relative to the size of its container, if the container's Layout supports it.

Return

number: The target y position as a percentage (as a value between 0.0 and 1.0) of the container's height.

This action computes the distance of the passed point from the collision shape attached to this item. This action is used internally and users should not need to use this action.

Return

Libraries.Game.Physics.PhysicsProperties2D: The distance of the point from the collision shape of this item

This action returns the target height of the Control in pixels. Note that this may not be used by some layouts (such as FlowLayout).

Return

number: The target height of this Control in pixels.

This action returns the target width of the Control in pixels. Note that this may not be used by some layouts (such as FlowLayout).

Return

number: The target height of this Control in pixels.

This action returns the target x position of the Control in pixels. Note that this may not be used by some layouts (such as FlowLayout).

Return

number: The target x position of this Control in pixels.

This action returns the target y position of the Control in pixels. Note that this may not be used by some layouts (such as FlowLayout).

Return

number: The target y position of this Control in pixels.

The GetContextMenu action returns this Control's context menu, if it has one. A context menu is a PopupMenu which appears when a user wants additonal context about this Control (most commonly by right-clicking on the Control).

Return

Libraries.Interface.Controls.PopupMenu:

This action returns the previous focus item. When this Item has the focus and the user requests the focus to move backwards (e.g. by pressing shift & tab), the returned value is the previous item to receive that focus, if it is defined. If it isn't defined, the focus can not move backwards from this Item.

Return

Libraries.Interface.Item: The previous Item to receive focus before this one.

Return

integer

Parameters

• text key

Return

Libraries.Data.Formats.JavaScriptObjectNotation

Return

Libraries.Containers.Iterator

This action is used to update this items position in physics space after physics solving is finished for this item. This action is used internally and users should not need to use this action.

Return

number:

This action returns the height of the region.

Return

integer:

This action returns the width of the TextureRegion.

Return

integer:

This action returns the x coordinate where the region begins on the Texture.

Return

integer:

This action returns the y coordinate where the region begins on the Texture.

Return

integer:

This action gets the inverse mass of the item (i.e., one divided by the mass of this item). Physics must be enabled on this item before using this action.

Return

integer: The inverse mass of this item

This action gets the total torque on this item. The units are kilogram units squared per second per second. Physics must be enabled on this item before using this action.

Return

number: The total torque in kilogram units squared per second per second

This action gets the right margin size. The right margin is the space outside of the right border.

Return

number: the number amount of right margin.

This action gets the right padding size. The right padding is the space inside of the right border.

Return

number: the number amount of right padding.

This action returns where the TextureRegion begins the right edge of its region on the stored texture, where 0 is the far left of the texture and 1 is the far right side of the texture.

Return

number:

Gets the current degree of rotation of this Item.

Return

number:

Gets the current rotation of this Item in radians.

Return

number:

This action will return the current x-scaling value of this Item2D. By default, the x-scaling value of an Item is 1.

Return

number:

This action will return the current y-scaling value of this Item2D. By default, the y-scaling value of an Item is 1.

Return

number:

This action returns the x coordinate of the Item on the screen. If the Item hasn't been attached to a Layer, this will return a "Not a Number" value instead.

Return

number:

This action returns the y coordinate of the Item on the screen. If the Item hasn't been attached to a Layer, this will return a "Not a Number" value instead.

Return

number:

This action returns the index of the first MenuItem visible in the scroll pane. This can return non-integer values to indicate the first item is partially offscreen -- for example, a returned value of 8.4 would indicate that the first visible item in the scroll pane is the 8th indexed item, and it is 40% of the way off of the top of the pane.

Return

number: The index of the first item visible in the scroll pane, with a decimal component describing how much of it is off the top of the panel (if any).

This action gets the selection border color.

Return

Libraries.Game.Graphics.ColorGroup: the selection border color.

This action gets the selection color from the control.

Return

Libraries.Game.Graphics.ColorGroup: the selection color.

This action gets the selection font color on the control.

Return

Libraries.Game.Graphics.ColorGroup: the selection font color.

This action return an iterator of all SelectionListeners which have been added to the Control of the given SelectionEvent.

Return

Libraries.Containers.Iterator: All SelectionListeners registered with the Control.

This action will create a new Texture with a solid black triangle that is made of the points identified by the three given points. The three points are relative to the origin of the Drawable. This texture is then loaded into the Drawable.

Return

Libraries.Language.Object:

Return

Libraries.Game.Graphics.Shaders.ShaderMapping:

Return

Libraries.Game.Graphics.Shaders.ShaderProgram:

This action gets the shaddow color from the control.

Return

Libraries.Game.Graphics.ColorGroup: the shaddow color.

This action returns the shadow edge fade property.

Return

number: the shadow edge fade number.

This action returns the shadow height property.

Return

number: the shadow height number.

This action returns the shadow width property.

Return

number: the shadow width number.

This action returns the shadow X value.

Return

number: the shadow X value.

This action returns the shadow Y value.

Return

number: the shadow Y value.

This item returns the collision shape of this item. The collision shape is the shape the collision system will use to test for collisions with this item. Note that this may be different from the shape drawn on the screen.

Return

Libraries.Game.Collision.Shapes.CollisionShape2D: The collision shape for this item

This action returns an integer representing the type of collision shape currently attached to this item.

Return

integer: The integer representing the type of collision shape for this item

Return

number

Return

integer

This action gets the children of this item in an array.

Return

number: The children of this item in an array

This action returns the swept movement of this item used for time of impact solving for the physics system. This action is used internally and users should not need to call this action.

Return

Libraries.Game.Collision.Sweep2D: The swept motion of this item

This action returns the texture that is currently loaded into the Drawable.

Return

Libraries.Game.Graphics.Texture:

This action returns the texture held by this TextureRegion.

Return

Libraries.Game.Graphics.Texture:

This action returns the top left pixel rounding value.

Return

number: the top left pixel rounding value.

This action returns the top left rounding value.

Return

number: the top left rounding value.

This action gets the top margin size. The top margin is the space outside of the top border.

Return

number: the number amount of top margin.

This action gets the top padding size. The top padding is the space inside of the top border.

Return

number: the number amount of top padding.

This action returns the top right pixel rounding value.

Return

number: the top right pixel rounding value.

This action returns the top right rounding value.

Return

number: the top right rounding value.

This action returns where the TextureRegion begins the top edge of its region on the stored texture, where 0 is the far bottom of the texture and 1 is the far top side of the texture.

Return

number:

This action gets the total torque on this item. The units are kilogram units squared per second per second. Physics must be enabled on this item before using this action.

Return

number: The total torque in kilogram units squared per second per second

This action returns an Iterator containing all of the TouchListeners that have been added to this Item using the AddTouchListener action.

Return

Libraries.Containers.Iterator: An iterator containing all of the registered TouchListeners.

This action returns the position of the item in physical space. This acction is used internally and should not be used by users to get the position of this item on the screen.

Return

Libraries.Game.Collision.PhysicsPosition2D: The position and angle of this item in physics space

This action gets the position of the item in physics space from the previous frame. This action is used internally and users should not need to use this action

Return

Libraries.Game.Collision.PhysicsPosition2D: The position and angle of the item in physics space in the previous frame

This action gets the unfocused selection border color on the control.

Return

Libraries.Game.Graphics.ColorGroup: the unfocused selection border color.

This action gets the unfocused selection color on the control.

Return

Libraries.Game.Graphics.ColorGroup: the unfocused selection color.

This action gets the unfocused selection font color on the control.

Return

Libraries.Game.Graphics.ColorGroup: the unfocused selection font color.

The SetVerticalLayoutMode is used to determine how the height of a Control is calculated. It should be one of the following constants: STANDARD, which will calculate the height as a set number of pixels plus a percentage of the container's height. FILL, which will make the height fill the remaining height of the container. FIT_CONTENTS, which will calculate the height to fit the children contents. FIT_FONT, which will fit the height of the Control to the line height of the Font set in this LayoutProperties.

Return

integer: the integer that maps to the layout mode constant, one of STANDARD, FILL, FILL_CONTENTS, or FIT_FONT.

The SetClipping action is used to enable or disable clipping. If it is enabled, when the Item and its children are drawn as part of the QueueForDrawing action, any pixels that would be drawn outside of the unrotated dimensions of the Item are not rendered. In other words, the Item will only draw inside the exact rectangle formed by its x, y position and its width and height.

Return

Libraries.Interface.Views.View2D:

This action searches through all Items stored in this Item2D and finds the deepest Item which contains the given point in global coordinates. This action will only return items which are visible (that is, IsShowing() returns true).

Parameters

• number x
• number y

Return

Libraries.Interface.Item2D: The deepest visible item in the children hierarchy at the given point.

This action will return the currently set width of the Item2D.

Return

number:

This action gets the position of the center of this item in global (world) coordinates.

Return

Libraries.Compute.Vector2: The vector representing the center of this item in global coordinates

Given a point relative to the center of this item, this action computes and returns that point in screen coordinates.

Parameters

• Libraries.Compute.Vector2: The point in coordinates with respect to the center of this item

Return

Libraries.Compute.Vector2: The screen coordinates of the passed local point

Given the local coordinates of a vector, this action computes the screen coordinates of the corresponding vector.

Parameters

• Libraries.Compute.Vector2: The coordinates of a local vector

Return

Libraries.Compute.Vector2: The coordinates of the corresponding global vector Attribute Example use Libraries.Interface.Item2D use Libraries.Compute.Vector2 Item2D item Vector2 localVector item:SetWidth(100) item:SetHeight(100) item:SetPosition(400, 250) localVector:Set(0, 0) // Get the coordinates of the center of the item Vector2 worldVector = item:GetWorldVector(localVector)

This action returns the currently set X coordinate of the Item.

Return

number:

This action returns the currently set Y coordinate of the Item.

Return

number:

This action returns the currently set Z value of this Item2D.

Return

number:

This action returns true when the border thickness on the control has been set.

Return

boolean: true when the border has thickness on the control.

This action returns true when teh bottom border is enabled.

Return

boolean:

This action returns the current status of the bottom left pixel rounding value.

Return

boolean: true if the control has a bottom left pixel rounding value.

This action returns the current status of the bottom left rounding value.

Return

boolean: true if the control has a bottom left rounding value.

This action returns the current status of the bottom right pixel rounding value.

Return

boolean: true if the control has a bottom right pixel rounding value.

This action returns the current status of the bottom right rounding value.

Return

boolean: true if the control has a bottom right rounding value.

This action gets whether the color property override is activated.

Parameters

• text property

Return

boolean: true if the color property is overridden.

This action returns the current status of the font outline thickness.

Return

boolean: true if the control has a font outline thickness set.

This action returns true when teh left border is enabled.

Return

boolean:

This action returns an integer representing the type of collision shape currently attached to this item.

Return

boolean: The integer representing the type of collision shape for this item

This action gets whether the number property override is activated.

Parameters

• text property

Return

boolean: true if the number property is overridden.

Return

boolean

Parameters

• text key

Return

boolean

This action returns true when teh right border is enabled.

Return

boolean:

This action returns the current status of the shadow edge fade.

Return

boolean: true if the control has a shadow edge fade.

This action returns the current status of the shadow height.

Return

boolean: true if the control has a shadow height.

This action returns the current status of the shadow width.

Return

boolean: true if the control has a shadow width.

This action returns the current status of the shadow X value.

Return

boolean: true if the control has a shadow X value.

This action returns the current status of the shadow Y value.

Return

boolean: true if the control has a shadow Y value.

This action returns true when teh top border is enabled.

Return

boolean:

This action returns the current status of the top left pixel rounding value.

Return

boolean: true if the control has a top left pixel rounding value.

This action returns the current status of the top left rounding value.

Return

boolean: true if the control has a top left rounding value.

This action returns the current status of the top right pixel rounding value.

Return

boolean: true if the control has a top right pixel rounding value.

This action returns the current status of the top right rounding value.

Return

boolean: true if the control has a top right rounding value.

This action is used to indicate that an Item and all Items that were added to it should not be visible on the screen. Note that the Item class on its own cannot be drawn on the screen, but classes that inherit from it such as Libraries.Game.Graphics.Drawable can be. By default, Items are considered visible.

This action returns whether or not this Item accepts mouse input. If the value is true, this will intercept incoming mouse events, triggering any related MouseListeners and InputSets and preventing the mouse event from propagating to other Items on the Layer. The default value is true.

Return

boolean: True if this Item can receive mouse events, or false otherwise.

This action returns the nearest parent object that is accessible. This can be anything that the programmer wants to be accessible, from user interface components in a 2D interface to 3D components relative in 3-space on screen. By default, items have no accessible parent and are self-contained, but user interface components normally override the behavior so that controls can be logically nested within each other. attribute: returns Item

Return

boolean:

The IsClipping action returns true if pixel clipping is enabled, or false if it is disabled. If it is enabled, when the Item and its children are drawn as part of the QueueForDrawing action, any pixels that would be drawn outside of the unrotated dimensions of the Item are not rendered. In other words, the Item will only draw inside the exact rectangle formed by its x, y position and its width and height.

Return

boolean: Whether or not pixel clipping is enabled for this Item.

This action determines whether this item is collidable.

Return

boolean: True if this item is collidable, false otherwise

The IsCustomDrawing action returns whether or not this Item is directly managing how itself and its children are drawn. When this value is true, the Item is responsible for determining its rendering via the Draw(Painter2D) action -- if this action isn't overridden, the Item and its children won't be drawn. This is an advanced feature only necessary for complex custom components, and most users will not need to use this functionality.

Return

boolean: Whether or not this Item is currently using custom drawing rules.

This action returns true if the user is currently dragging the scroll bar with the mouse, or false otherwise.

Return

boolean: Whether or not the scroll bar is being dragged with the mouse.

Return

boolean

This action sets this item's angular velocity in radians per second. Physics must be enabled in this item before using this action.

Return

boolean:

This action will return true if the Drawable has been flipped across the x-axis, or false if it has not.

Return

boolean:

This action will return true if the Drawable has been flipped across the y-axis, or false if it has not.

Return

boolean:

This action returns whether or not the Item can currently receive focus. This property can be set with SetFocusable().

Return

boolean:

The IsFocused action determines if this Item is currently focused, returning true if it is, or false if it is not.

Return

boolean:

This action returns true if there is a texture currently loaded into the Drawable, otherwise it returns false.

Return

boolean:

This action gets the number of broadphase nodes this item has. This action is used internally and users should not need to use this action.

Return

boolean: The number of broadphase nodes attached to this item

This action returns true if the item has been added to a Layer, or false otherwise.

Return

boolean: True if the item is on a Layer, or false otherwise.

This action determines whether physics is currently enabled for this item.

Return

boolean: True if physics is enabled for this item, false otherwise

Returns true if rendering the focus event.

Return

boolean:

Returns true if rendering the mouse down event.

Return

boolean:

Returns true if rendering the mouse over event.

Return

boolean:

Returns true if rendering the selection event.

Return

boolean:

This action sets this item to be collidable. Passing true turns on collision for this item while passing false turns off collision for this item.

Return

boolean:

This action determines whether physics is currently enabled for this item.

Return

boolean: True if physics is enabled for this item, false otherwise

Return

boolean

This action returns whether the Item is currently set to be visible on the screen.

Return

boolean: A boolean representing whether or not the Item is currently visible.

This action gets the position of the center of this item in local coordinates (i.e., with respect to itself).

Return

boolean: The vector representing the center of this item in local coordinates

This action sets the x-component of this item's linear velocity in units per second. Physics must be enabled on this item before using this action.

Return

boolean:

This action creates the nodes for this item for the broadphase collision. This action is needed in order to add the item to the collision detection system. This action is used internally and users should not need to use this action.

Return

boolean:

This action will load the given TextureRegion into this Drawable, which will set its appearance when drawn on screen.

Parameters

• Libraries.Game.Graphics.TextureRegion

This action will create a new texture from the image file located at the given file path. This texture will then be loaded into this Drawable. This sets the Drawable's appearance when it is drawn on the screen.

Parameters

• text filePath

This action will load a matrix into a Texture to create a monochrome (black and white) image, then load the Texture into this Drawable. Each value is assumed to be between 0 and 1, where 0 represents a black pixel and 1 represents a white pixel.

Parameters

• Libraries.Compute.Matrix: The matrix representing the pixels to load.

This action will load the given texture into this Drawable, loading from the lower left corner of the texture to the given width and height.

Parameters

• Libraries.Game.Graphics.Texture
• integer sourceWidth
• integer sourceHeight

Parameters

• Libraries.Game.Graphics.Texture
• integer sourceX
• integer sourceY
• integer sourceWidth
• integer sourceHeight

This action will create a new texture from provided image file. This texture will then be loaded into this Drawable. This sets the Drawable's appearance when it is drawn on the screen.

Parameters

• Libraries.System.File

This action will load the given texture into this Drawable. This sets the Drawable's appearance when it is drawn on the screen.

Parameters

• Libraries.Game.Graphics.Texture

If the Drawable is loaded, ensure it gets laid out again on the next sizing call.

Parameters

• Libraries.Game.Graphics.TextureRegion
• integer sourceX
• integer sourceY
• integer sourceWidth
• integer sourceHeight

This action will create a new Texture with a hollow circle of the given color with the given radius. This texture is then loaded into the Drawable.

Parameters

• integer radius
• Libraries.Game.Graphics.ColorGroup

This action will create a new Texture with a hollow black circle with the given radius. This texture is then loaded into the Drawable.

Parameters

• integer radius

This action will create a new Texture with a solid black circle with the given radius. This texture is then loaded into the Drawable.

Parameters

• integer radius

This action will create a new Texture with a solid circle of the given color with the given radius. This texture is then loaded into the Drawable.

Parameters

• integer radius
• Libraries.Game.Graphics.ColorGroup

This action will create a new Texture with a solid black rectangle with the given width and height. This texture is then loaded into the Drawable.

Parameters

• integer width
• integer height

This action will create a new Texture with a solid rectangle of the given color with the given width and height. This texture is then loaded into the Drawable.

Parameters

• integer width
• integer height
• Libraries.Game.Graphics.ColorGroup

This action will create a new Texture with a solid black triangle that is made of the points identified by the three given points. The three points are relative to the origin of the Drawable. This texture is then loaded into the Drawable.

Parameters

• integer x1
• integer y1
• integer x2
• integer y2
• integer x3
• integer y3

This action will create a new Texture with a solid triangle of the given color that is made of the points identified by the three given points. The three points are relative to the origin of the Drawable. This texture is then loaded into the Drawable.

Parameters

• integer x1
• integer y1
• integer x2
• integer y2
• integer x3
• integer y3
• Libraries.Game.Graphics.ColorGroup

Set the size of the menu panel to fit the items in view, and adjust the position so the top remains in the same place.

Parameters

• Libraries.Interface.Layouts.LayoutProperties

This action will create a new Texture with a black line that connects an imaginary point at 0,0 to the provided x,y coordinates. This texture is then loaded into the Drawable.

Parameters

• integer x
• integer y

This action will create a new Texture with a line of the given color that connects between an imaginary point at 0,0 to the provided x,y coordinates. This texture is then loaded into the Drawable.

Parameters

• integer x
• integer y
• Libraries.Game.Graphics.ColorGroup

This action will create a new Texture with a hollow rectangle of the given color with the given width and height. This texture is then loaded into the Drawable.

Parameters

• integer width
• integer height
• Libraries.Game.Graphics.ColorGroup

This action will create a new Texture with a hollow black rectangle with the given width and height. This texture is then loaded into the Drawable.

Parameters

• integer width
• integer height

Parameters

• Libraries.Containers.Array

Parameters

• Libraries.Containers.Array
• Libraries.Game.Graphics.ColorGroup

Parameters

• Libraries.Containers.Array
• Libraries.Containers.Array

This action loads an entire texture into the TextureRegion.

Parameters

• Libraries.Game.Graphics.Texture

This action loads part of a texture into this TextureRegion, starting from the given x,y coordinates of the Texture to the given width and height.

Parameters

• Libraries.Game.Graphics.Texture
• integer x
• integer y
• integer width
• integer height

This action loads part of a texture into the TextureRegion, starting from the bottom left corner to the given width and height.

Parameters

• Libraries.Game.Graphics.Texture
• integer width
• integer height

This action loads part of a texture into this TextureRegion, using the given percentage coordinates from 0 to 1 of the texture to load.

Parameters

• Libraries.Game.Graphics.Texture
• number left
• number right
• number top
• number bottom

This action is fired if the item lost the focus.

Parameters

• Libraries.Interface.Events.FocusEvent

This action is used when a control loses the selection.

This action will increase the x and y coordinates of this Item by the values stored in the provided Vector2.

Parameters

• Libraries.Compute.Vector2

This action will increase the x and y coordinates of this Item by the given amounts.

Parameters

• number xAmount
• number yAmount

This action will increase the x-coordinate of this Item by the given amount.

Parameters

• number xAmount

This action will increase the y-coordinate of this Item by the given amount.

Parameters

• number yAmount

This action will increase the z-coordinate of this Item by the given amount.

Parameters

• number zAmount

This action returns whether or not the Control is in need of laying out by its container (or the parent Layer2D, if no container Control exists).

Return

boolean:

This action adds a different Item2D into this one, storing the added Item2D at a specific index in the internal array.

Parameters

• Libraries.Interface.Events.ControlActivationEvent

This action will notify all SelectionListeners which have been added to the Control of the given SelectionEvent.

Parameters

• Libraries.Interface.Events.SelectionEvent: The SelectionEvent to send to all SelectionListeners registered with the Control.

This action removes all TextureLoadListeners that have been added to the texture.

Parameters

• Libraries.Interface.Events.TextureLoadEvent

Checks to see if the Item2D's internal vertices are up to date, and updates them if they are not. This is used primarily internally to ensure that the item's vertices are properly aligned before use, e.g. to project an image on the screen at the coordinates of the vertices. Most users will never need to use this action directly.

This action takes a gesture event and handles it. It will first test to see if the gesture event took place within the bounds of this Item. If so, it will notify any GestureListeners of the event. If the event was not contained within this Item, or if there are no GestureListeners on this Item, the Item will ask its parent Item to process the event, if there is a parent.

Parameters

• Libraries.Interface.Events.GestureEvent

This action takes a mouse event and handles it. It will first test to see if the mouse event took place within the bounds of this Item. If so, it will notify any MouseListeners of the event. If the event was not contained within this Item, or if there are no MouseListeners on this Item, the Item will ask its parent Item to process the mouse event, if there is a parent.

Parameters

• Libraries.Interface.Events.MouseEvent

This action takes a touch event and handles it. It will first test to see if the touch event took place within the bounds of this Item. If so, it will notify any TouchListeners of the event. If the event was not contained within this Item, or if there are no TouchListeners on this Item, the Item will ask its parent Item to process the touch event, if there is a parent.

Parameters

• Libraries.Interface.Events.TouchEvent

The QueueForDrawing action is what makes a Drawable appear on the screen. This action will automatically be called by the Game class if the Drawable has been added to the Game with the Add(Item) action.

Parameters

• Libraries.Game.Graphics.Painter2D

This action is used when a control is released by the mouse.

Parameters

• Libraries.Interface.Controls.MenuItem

Parameters

• integer index

Return

Libraries.Interface.Item2D

This action removes an Item2D from the internal array.

Parameters

• Libraries.Interface.Item2D

Return

boolean:

This action removes an Item2D from the internal array.

Parameters

• Libraries.Interface.Events.ControlActivationListener

This action removes a FocusListener from the Item. The listener will no longer receive notification if the Item gets a FocusEvent.

Parameters

• Libraries.Interface.Events.FocusListener

This action removes a GestureListener from the Item. The listener will no longer receive notification if the Item gets a GestureEvent.

Parameters

• Libraries.Interface.Events.GestureListener

Returns true if rendering the mouse over event.

Parameters

• Libraries.Interface.Layouts.LayoutProperties

This action removes a MouseListener from the Item. The listener will no longer receive notification if the Item gets a mouse click event.

Parameters

• Libraries.Interface.Events.MouseListener

This action removes a MouseMovementListener from the Item. The listener will no longer receive notification if the Item gets a mouse movement event.

Parameters

• Libraries.Interface.Events.MouseMovementListener

This action removes a MouseWheelListener from the Item. The listener will no longer receive notification if the Item gets a mouse wheel event.

Parameters

• Libraries.Interface.Events.MouseWheelListener

This action removes the given SelectionListeners from the Control.

Parameters

• Libraries.Interface.Events.SelectionListener: the selectionListener to remove from the control.

Return

boolean: true if the selectionListener is removed.

This action removes a TextureLoadListener from the texture. If the listener was not previously added to this texture, this does nothing.

Parameters

• Libraries.Interface.Events.TextureLoadListener: A TextureLoadListener to be removed from the Texture.

This action removes a TouchListener from the Item. The listener will no longer receive notification if the Item gets a TouchEvent.

Parameters

• Libraries.Interface.Events.TouchListener

This action requests that this Control should be laid out by its container (or the Layer2D if there is no containing Control) during the next Update.

This action requests that this Control (as well as all of its descendents) should reload their graphics during the next Update.

This action informs the engine that this Item needs to recalculate its vertex values before they can be used (most commonly, to be drawn to the screen). Most users will never need to call this directly. If you are using a custom ShaderProgram with this Item, you can use this action to indicate that the shader mapping should reset the vertex values for this Item before its drawn again.

This action sets the y-component of this item's linear velocity in units per second. Physics must be enabled on this item before using this action.

Parameters

• boolean flag

This action is used to indicate that the Control no longer needs to be laid out. This is called internally by the system as needed, and shouldn't be necessary for most users.

This action sets the mass, mass moment of inertia, and how the 2D item should move (via linear velocity) to be at the desired location.

Rotates this Item2D by the given number of degrees. This will also rotate all Items in the children hierarchy of this Item.

Parameters

• number degrees

This action will multiply the current scaling value by the given number. A parameter of 0 or less will be ignored.

Parameters

• number amount

This action will multiply the x scaling and y scaling values, respectively, by the given numbers. A parameter of 0 or less will be ignored.

Parameters

• number xAmount
• number yAmount

This action will multiply the current scaling value by the given number. A parameter of 0 or less will be ignored. This action will increase or decrease the scale of the object from the center, and update the Item's x,y coordinates to reflect the new bottom-left corner of the Item.

Parameters

• number amount

This action will multiply the current scaling values of the x and y planes by the given number. A parameter of 0 or less will be ignored. This action will increase or decrease the scale of the object from the center, and update the Item's x,y coordinates to reflect the new bottom-left corner of the Item.

Parameters

• number xAmount
• number yAmount

Parameters

• Libraries.Interface.Controls.MenuItem

This action selects an item in the Control using first letter navigation, if the Control supports it. If the Control doesn't support first letter navigation, this will do nothing.

Parameters

• text firstLetter

This action sets the accent color on the control.

Parameters

• Libraries.Game.Graphics.ColorGroup: the accent control.

This action sets whether or not this Item accepts mouse input. If set to true, this will intercept incoming mouse events, triggering any related MouseListeners and InputSets and preventing the mouse event from propagating to other Items on the Layer. The default value is true.

Parameters

• boolean accepts: True to set this Item to receive mouse events, or false to ignore them.

This action changes the accessibility code for this Item. This should be done with care because setting the accessiblity code to the incorrect type can cause accessibility to stop functioning or, in some cases, cause the program to crash.

Parameters

• integer newAccessibilityCode: the new accessibility code for this Item.

This action sets a custom accessibility role description for this item. This should only be done if there is not a standard accessibility code for the type of item being implemented. If the item behaves very similarly to a standard control type, then set the accessibility code to that standard type while also setting the role description. For example, if implementing an item that extends Control, is keyboard focusable, and responds to activation via both mouse clicks and the Space key, like a button, but it shouldn't be described as a button, then set the accessibility code to BUTTON and the custom role description to whatever is appropriate. If there isn't a suitable accessibility code, or if in doubt, set the accessibility code to CUSTOM.

Parameters

• text newRoleDescription: the new custom role description for this Item.

Sets the alpha of the Drawable. The alpha represents how transparent the Drawable is. The given value should be between 0 and 1, where a value of 0 is totally transparent, and a value of 1 is totally opaque.

Parameters

• number alpha

This action gets the rotational inertia of this item. The inertia is in kilogram units squared.

Parameters

• number angularDamping

This action sets this item's angular velocity in radians per second. Physics must be enabled in this item before using this action.

Parameters

• number angularVelocity: The angular velocity of this item in radians per second

Parameters

• number width

This action sets the background color in the Control.

Parameters

• Libraries.Game.Graphics.ColorGroup: the background color.

This action sets the border color of the control.

Parameters

• Libraries.Game.Graphics.ColorGroup: the border color.

This action sets the border style either, LayoutProperties.TOP, LayoutProperties.BOTTOM, LayoutProperties.LEFT, LayoutProperties.RIGHT, and LayoutProperties.ALL.

Parameters

• integer style

This action sets the border thickness on the control.

Parameters

• number value: the border thickness.

This action sets the bottom left pixel rounding value.

Parameters

• number value: the bottom left pixel rounding value.

This action sets the bottom left rounding value.

Parameters

• number value: the bottom left rounding value.

This action sets the bottom margin size. The bottom margin is the space outside of the bottom border.

Parameters

• number padding: the amount of bottom margin.

This action sets the bottom padding size. The bottom padding is the space inside of the bottom border.

Parameters

• number padding: the amount of bottom margin.

This action sets the bottom right pixel rounding value.

Parameters

• number value: the bottom right pixel rounding value.

This action sets the bottom right rounding value.

Parameters

• number value: the bottom right rounding value.

This action selects a point on the loaded texture that this Drawable will consider to be the bottom edge of the image to be drawn. 0 represents the bottom edge of the base texture, and 1 represents the top edge of the base texture.

Parameters

• number bottom

This action will set the x coordinate, y coordinate, width, and height of the Item2D, respectively.

Parameters

• number newX
• number newY
• number newWidth
• number newHeight

This action will set the X and Y coordinates of the Item so that the center of the Item is located at the given X, Y coordinates.

Parameters

• number setX
• number setY

This action will set the X coordinate of the Item so that the center of the Item is aligned with the given X coordinate value.

Parameters

• number setX

This action will set the Y coordinate of the Item so that the center of the Item is aligned with the given Y coordinate value.

Parameters

• number setY

The SetChildrenProcessingMouseEvents action is used to set whether or not children items should receive mouse events if this Item is using custom drawing. This affects only custom drawing Items -- if the Item isn't drawing, children objects will always receive the mouse events first. This value is false by default. This is an advanced feature only necessary for complex custom components, and most users will not need to use this.

Parameters

• boolean shouldProcess

This action sets the clipping coordinates of the given painter to respect the coordinates of this Item (if it's clipping) as well as any clipping being performed by parent Items. This action is called automatically by the Game engine as necessary, and most users will never need to use this action directly.

Parameters

• Libraries.Game.Graphics.Painter2D

The SetClipping action is used to enable or disable clipping. If it is enabled, when the Item and its children are drawn as part of the QueueForDrawing action, any pixels that would be drawn outside of the unrotated dimensions of the Item are not rendered. In other words, the Item will only draw inside the exact rectangle formed by its x, y position and its width and height.

Parameters

• boolean clip: True to enable pixel clipping, false to disable.

This action sets this item to be collidable. Passing true turns on collision for this item while passing false turns off collision for this item.

Parameters

• boolean flag: Whether or not to turn collision on for this item

This action gets the position of the item in physics space from the previous frame. This action is used internally and users should not need to use this action

Parameters

• boolean flag

This action sets the total torque on this item. The units are kilogram units squared per second per second. This action should be used to set the total torque on this item. If we want to apply a torque to this item, we should use the ApplyTorque actions instead. Physics must be enabled on this action before using this action.

Parameters

• boolean flag

This action sets the total force on this item. The units are kilogram units per second per second. This action should be used to set the total force on this item. If we want to apply a force to this item, we should use the ApplyForce actions instead. Physics must be enabled on this item before using this action.

Parameters

• integer index

This is an action used internally by the physics system to keep track of the collisions with this item in a linked list structure. This action sets the head of the linked list of collisions to the passed CollisionEdge2D object. This action is used internally and users should not need to use this action.

Parameters

• Libraries.Game.Collision.CollisionEdge2D: The new head of the linked list of collisions

Sets the color filter on this Drawable. This will reduce the intensity of colors in the Drawable that are not part of the filter, while leaving the other colors that are part of the filter as the same.

Parameters

• Libraries.Game.Graphics.ColorGroup

Sets the color filter of the Drawable from the given components of red, green, blue, and alpha. The values for the components should be between 0 and 1, representing 0% to 100% of that color or alpha.

Parameters

• number red
• number green
• number blue
• number alpha

This action sets the color and property in the Control.

Parameters

• text property
• Libraries.Game.Graphics.ColorGroup: the color.

This action sets how many rows this Control should be divided into when using a GridLayout. This will have no effect if this Control is not a container or if it is using a different layout. If this value is 0 or less, then the GridLayout will use its default grid height and ignore this value.

Parameters

• integer containerGridHeight

This action sets how many columns this Control should be divided into when using a GridLayout. This will have no effect if this Control is not a container or if it is using a different layout. If this value is 0 or less, then the GridLayout will use its default grid width and ignore this value.

Parameters

• integer containerGridWidth

This action sets how much rounding to apply to the four corners of a rectangular control. This action takes the amount of rounding to apply as a number of pixels.

Parameters

• number bottomLeft: The rounding value to be applied to the bottom left corner, in pixels.
• number bottomRight: The rounding value to be applied to the bottom right corner, in pixels.
• number topLeft: The rounding value to be applied to the top left corner, in pixels.
• number topRight: The rounding value to be applied to the top right corner, in pixels.

This action sets how much rounding to apply to the four corners of a rectangular control. The expected values are between 0 and 1, where 0 indicates no rounding, and 1 indicates full rounding. (If all four corners are set to have full rounding, the result will appear to be a circle.)

Parameters

• number bottomLeft: The rounding value to be applied to the bottom left corner (between 0 and 1).
• number bottomRight: The rounding value to be applied to the bottom right corner (between 0 and 1).
• number topLeft: The rounding value to be applied to the top left corner (between 0 and 1).
• number topRight: The rounding value to be applied to the top right corner (between 0 and 1).

The SetCustomDrawing action is used to indicate that this Item wants to directly manage how itself and its children are drawn. When this is set to true, the Item must be responsible for determining this rendering via the Draw(Painter2D) action -- if this action isn't overridden, the Item and its children won't be drawn. This is an advanced feature only necessary for complex custom components, and most users will not need to use this functionality.

Parameters

• boolean isCustom: True if this Item should use custom drawing, or false to use default drawing rules.

This action applies an angular impulse to this item. The units are in kilogram units squared per second. This modifies the angular velocity of this item. Physics must be enabled on this item before using this action.

Parameters

• number density

This action sets the internal description of the Item.

Parameters

• text newDescription

This action returns true if the user is currently dragging the scroll bar with the mouse, or false otherwise.

Parameters

• boolean drag

This action will create a new Texture with a hollow black circle with the given radius. This texture is then loaded into the Drawable.

Parameters

• Libraries.Game.Graphics.DrawableShape

This action sets an integer code representing the type of graphics that's been loaded into this Drawable. The type values can be found in the SceneProperties class. This action is used internally by the engine as needed, and most users won't ever need to call this directly.

Parameters

• integer type