Libraries.Interface.Controls.TreeItemContent Documentation

Inherits from: Libraries.Interface.Item, Libraries.Interface.Controls.Control, Libraries.Interface.Item2D, Libraries.Language.Object

Actions Documentation

Activate(Libraries.Interface.Events.BehaviorEvent event)

Returns true if rendering the focus event.

Parameters

Activate()

This action returns a default behavior for this paricular control. Some controls do nothing by default, like a TextBox that responds to different kinds of input. Others, however, have default behaviors, like a Button or a MenuItem. If there is no default behavior, this action returns undefined.

Add(integer index, Libraries.Interface.Item2D newItem)

This action adds a different Item2D into this one, storing the added Item2D at a specific index in the internal array.

Parameters

Example

use Libraries.Interface.Item2D

Item2D parentItem
Item2D child
parentItem:Add(0, child)

Add(Libraries.Interface.Item2D newItem)

This action adds a different Item2D into this one. This makes a few things happen. 1. The added item will get this item as its parent. 2. The added item's x and y coordinates will become relative to this Item. 3. Most actions on this Item will also affect the added Item.

Parameters

Example

use Libraries.Interface.Item2D

Item2D parentItem
Item2D child
parentItem:Add(child)

AddBehavior(Libraries.Interface.Behaviors.Behavior behavior)

This action adds a new Behavior to this Item.

Parameters

AddControlActivationListener(Libraries.Interface.Events.ControlActivationListener listener)

This action removes an Item2D at a specifed index from the internal array.

Parameters

Example

use Libraries.Interface.Item2D

Item2D parentItem
Item2D child
parentItem:Add(0, child)
parentItem:Remove(0)

AddFocusListener(Libraries.Interface.Events.FocusListener listener)

This action adds a FocusListener to the Item. When the Item receives a FocusEvent due to either gaining or losing the focus, the listener will be notified.

Parameters

Example

use Libraries.Interface.Item
use Libraries.Interface.Events.FocusListener
Item myItem
FocusListener listener
myItem:AddFocusListener(listener)

AddGestureListener(Libraries.Interface.Events.GestureListener listener)

This action adds a GestureListener to the Item. If the Item ever receives a GestureEvent, the listener will be notified.

Parameters

Example

use Libraries.Interface.Item
use Libraries.Interface.Events.GestureListener
Item myItem
GestureListener listener
myItem:AddGestureListener(listener)

AddLayoutProperties(Libraries.Interface.Layouts.LayoutProperties properties)

Returns true if rendering the mouse down event.

Parameters

AddMouseListener(Libraries.Interface.Events.MouseListener listener)

This action adds a MouseListener to the Item. If the Item ever receives a MouseEvent due to a mouse click, the mouse listener will be notified.

Parameters

Example

use Libraries.Interface.Item
use Libraries.Interface.Events.MouseListener
Item myItem
MouseListener listener
myItem:AddMouseListener(listener)

AddMouseMovementListener(Libraries.Interface.Events.MouseMovementListener listener)

This action adds a MouseMovementListener to the Item. If the Item ever receives a MouseEvent due to mouse movement, the listener will be notified.

Parameters

Example

use Libraries.Interface.Item
use Libraries.Interface.Events.MouseMovementListener
Item myItem
MouseMovementListener listener
myItem:AddMouseMovementListener(listener)

AddMouseWheelListener(Libraries.Interface.Events.MouseWheelListener listener)

This action adds a MouseWheelListener to the Item. If the Item ever receives a MouseEvent due to the mouse wheel being scrolled, the listener will be notified.

Parameters

Example

use Libraries.Interface.Item
use Libraries.Interface.Events.MouseWheelListener
Item myItem
MouseWheelListener listener
myItem:AddMouseWheelListener(listener)

AddSelectionListener(Libraries.Interface.Events.SelectionListener listener)

This action adds the given SelectionListeners to the Control.

Parameters

AddTouchListener(Libraries.Interface.Events.TouchListener listener)

This action adds a TouchListener to the Item. If the Item ever receives a TouchEvent, the listener will be notified.

Parameters

Example

use Libraries.Interface.Item
use Libraries.Interface.Events.TouchListener
Item myItem
TouchListener listener
myItem:AddTouchListener(listener)

Advance(number time)

This action is used to advance the item forward in time in physics space to synchronize it for time of impact solving. This action is used internally and users should not need to use this action. Attribute Parameter time The amount of seconds to advance the item forward in time

Parameters

  • number time

ApplyAngularImpulse(number impulse)

This action applies an angular impulse to this item. The units are in kilogram units squared per second. This modifies the angular velocity of this item. Physics must be enabled on this item before using this action.

Parameters

  • number impulse: The angular impulse in kilogram units squared per second

Example

use Libraries.Interface.Item2D

Item2D item
item:SetWidth(100)
item:SetHeight(100)
item:EnablePhysics(true)
item:ApplyAngularImpulse(80)

ApplyForce(Libraries.Compute.Vector2 force, Libraries.Compute.Vector2 point)

This action applies a force to this item at the passed point. The force is in kilogram units per second per second. The point is the screen coordinates where the point will be applied. If the point is not on the center of the item, then a torque will be introduced causing the item to rotate. Physics must be enabled on this item before using this action.

Parameters

Example

use Libraries.Compute.Vector2
use Libraries.Interface.Item2D

Item2D item
Vector2 force
Vector2 point

item:SetWidth(100)
item:SetHeight(100)
item:EnablePhysics(true)

force:Set(300, 350)
point:Set(100, 100)    // apply the force to the top right corner of the item

item:ApplyForce(force, point)

ApplyForceToCenter(Libraries.Compute.Vector2 force)

This action applies a force to this item at the center of the item. The force is in kilogram units per second per second. No torque is introduced to the item when using this action. Physics must be enabled on this item before using this action.

Parameters

Example

use Libraries.Compute.Vector2
use Libraries.Interface.Item2D

Item2D item
Vector2 force

item:SetWidth(100)
item:SetHeight(100)
item:EnablePhysics(true)

force:Set(300, 350)

item:ApplyForce(force)

ApplyLinearImpulse(Libraries.Compute.Vector2 impulse, Libraries.Compute.Vector2 point)

This action applies a linear impulse to this item at the passed point. The impulse is in kilogram units per second. This immeadietly modifies the linear velocity of this item. The point is the screen coordinates where the impulse will be applied. If the point is not the center of the item, then the angular velocity of this item will also be modified. Physics must be enabled on this item before using this action.

Parameters

Example

use Libraries.Interface.Item2D
use Libraries.Compute.Vector2

Item2D item
Vector2 impulse
Vector2 point

item:SetWidth(100)
item:SetHeight(100)
item:EnablePhysics(true)

impulse:Set(100)
point:Set(100, 100)     // apply the impulse to the top right corner

item:ApplyLinearImpulse(impulse, point)

ApplyTorque(number torque)

This action applies a torque to this item. The units are kilogram units squared per second per second. Physics must be enabled on this item before using this action.

Parameters

  • number torque: The torque to apply to this item in kilogram units squared per second per second

Example

use Libraries.Interface.Item2D

Item2D item
item:SetWidth(100)
item:SetHeight(100)
item:EnablePhysics(true)
item:ApplyTorque(350)

AreChildrenProcessingMouseEvents()

This action returns whether or not this Item is allowing its children to receive mouse events if the Item is custom drawing. If the Item isn't using custom drawing, this value is irrelevant -- children objects always receive mouse events before the parent if the parent isn't performing custom drawing.

Return

boolean:

BeginCollision(Libraries.Interface.Item item)

This action is used to indicate that two items have just begun colliding. When two Items collide, the BeginCollision action should be called on both of them, with the other item passed as a parameter to the action. Note that this action does nothing by default, but classes that inherit from Item may override it.

Parameters

Example

use Libraries.Interface.Item

Item collider1
Item collider2
collider1:BeginCollision(collider2)
collider2:BeginCollision(collider1)

BeginMouseOver()

This action is used when a control is moused over by the mouse.

CanRotate(boolean flag)

This action gets the position of the center of this item in global (world) coordinates.

Parameters

  • boolean flag

CancelBehaviors()

This action stops all behaviors this Item is following without finishing them.

ClickedMouse()

This action is used when a control is clicked by the mouse.

CollideWithChildren()

This action sets the mass, mass moment of inertia, and how the 2D item should move (via linear velocity) to be at the desired location.

Return

boolean:

Compare(Libraries.Language.Object object)

This action compares two object hash codes and returns an integer. The result is larger if this hash code is larger than the object passed as a parameter, smaller, or equal. In this case, -1 means smaller, 0 means equal, and 1 means larger. This action was changed in Quorum 7 to return an integer, instead of a CompareResult object, because the previous implementation was causing efficiency issues.

Parameters

Return

integer: The Compare result, Smaller, Equal, or Larger.

Example

Object o
Object t
integer result = o:Compare(t) //1 (larger), 0 (equal), or -1 (smaller)

ComputeDistance(Libraries.Compute.Vector2 point, integer childIndex, Libraries.Compute.Vector2 normalOut)

This action computes the distance of the passed point from the collision shape attached to this item. This action is used internally and users should not need to use this action.

Parameters

  • Libraries.Compute.Vector2: The vector representing the point to compute the distance from
  • integer childIndex: The index of the collision shape attached to this item we want the bounding box of
  • Libraries.Compute.Vector2: The direction of the point from the shape

Return

number: The distance of the point from the collision shape of this item

Contains(number containsX, number containsY)

This action tests if a point in global x,y coordinates is contained inside this Item2D. The global coordinates are considered to be the x and y coordinates of this Item plus its offsetX and offsetY values.

Parameters

  • number containsX
  • number containsY

Return

boolean: Whether or not the point is contained in this Item.

Example

use Libraries.Interface.Item2D

Item2D item
item:SetPosition(50, 50)
item:SetWidth(100)
item:SetHeight(50)
boolean value = item:Contains(125, 70)

CopyAndActivateInputTable(text name)

This action obtains the Input Table from this control, copies it, assigns it a group name, sets the control to use the new input table, and then adds it to the global input table hash table.

Parameters

  • text name: the name of the group for the new input table.

Return

Libraries.Game.InputTable: the input table copy

Example

use Libraries.Game.Game
use Libraries.Interface.Controls.TextBox
use Libraries.Game.InputTable

class Main is Game
    action Main
        StartGame()
    end

    action CreateGame
        TextBox box
        InputTable copy = box:CopyAndActivateInputTable("New Group")
    end

    action Update(number seconds)
    end
end

CreateNodes(Libraries.Game.Collision.BroadphaseCollision2D broadphase, Libraries.Game.Collision.PhysicsPosition2D transform)

This action creates the nodes for this item for the broadphase collision. This action is needed in order to add the item to the collision detection system. This action is used internally and users should not need to use this action.

Parameters

DestroyNodes(Libraries.Game.Collision.BroadphaseCollision2D broadphase)

This action destroys the nodes for this item for the broadphase collision, essentially removing it from the collision detection system. This action is used internally and users should not need to use this action.

Parameters

Dispose()

This action is used to free up any additional memory that is being used by this Item for purposes such as graphics. Note that the Item class doesn't have any extra memory that needs to be released with this action, but some classes which inherit from Item, such as Libraries.Game.Graphics.Drawable, do.

DisposeAll()

This action is used to call Dispose on this Item and on the entire children hierarchy of this Item.

DisposeChildren()

This action is used to call Dispose on the entire children hierarchy of this Item. This will not call Dispose on this Item.

Draw(Libraries.Game.Graphics.Painter2D painter)

The Draw action is used to perform custom drawing on this Item and its children. This is only called during the Game engine's draw phase if this Item has enabled custom drawing via the SetCustomDrawing action. This is an advanced feature, and shouldn't be used by most users. If custom drawing is enabled, this action should be overriden -- if it isn't, the Item will attempt to provide default rendering for itself, its view, and its children, without regard to depth buffering. This action is responsible for instructing the provided Painter on how to draw this item, the view, and its children, and in what order to do so.

Parameters

Empty()

This action will remove all items from this item's children hierarchy. Note that this will not empty the hierarchies of the contained Items.

Example

use Libraries.Interface.Item2D

Item2D parentItem
Item2D child1
Item2D child2
Item2D grandchild
parentItem:Add(child1)
parentItem:Add(child2)
child1:Add(grandChild)
parentItem:Empty()

EmptyAll()

This action will call Empty on the entire children hierarchy of this item, and then empty this item as well.

EmptyChildren()

This action is used to call Empty on all children contained in this item's children hierarchy. This will not empty the children of this item.

EmptySelectionListeners()

This action empties or removes all SelectionListeners which have been added to the Control of the given SelectionEvent.

EnablePhysics(boolean flag)

This action enables physics for this item. Passing true turns on physics for this item while passing false turns off physics for this item.

Parameters

  • boolean flag: Whether or not to enable physics for this item

Example

use Libraries.Game.Graphics.Drawable

Drawable circle
circle:LoadFilledCircle(30)
circle:EnablePhysics(true)

EndMouseOver()

This action is used when a control is moused over and it ends.

Equals(Libraries.Language.Object object)

This action determines if two objects are equal based on their hash code values.

Parameters